- Products
- Electronic Regulation
- FermFlex-Box
Description
The elegant stainless-steel control cabinet FermFlex-Box serves to control tanks temperature automatically, from a central point in the wine cellar or in the brewery. For each tank to be controlled a FermFlex-Box control card is included. Therefore the temperatures of all tanks can be viewed at a glance and the settings can be changed on the spot.
The FermFlex-Box control unit receives its input through a cable-type sensor (available as an accessory) which is placed in the thermo-well of the respective tank. The controllers are designed in such a way that temperatures are optimally visualised: There are two separate displays for the pre-set temperature and the measured temperature (is temperature). The operation mode of the controller - cooling or heating - is indicated on a LED display. Moreover the control cabinet has two integrated relays for pump control: one for heating and one for cooling.
The FermFlex-Box control cabinets are equipped with a PC interface so that the temperature settings can be adjusted either physically on the cabinet or in the office using the Ferm-Software installed on a Server PC (option). Using the software allows easy and quick analysis of the measured data, data-saving of finished fermentations for later evaluation and archiving. Software access is enabled over lap-top and mobile phone over safe internet access. The new FermLine controllers can be locked by code – single units or the whole installation at once via BUS system - to prevent temperature modification by unauthorized personnel. The FermFlex-Box can also be completely integrated in the bus system VinInfo.
The cabinets are available inthree different sizes – for 10, for 20 or for 30 controllers (one controller per tank). With this new generation of FermFlex-Box it is possible to add more controllers afterwards if the maximum amount of controllers (10 / 20 / 30) is not needed for the initial installation.
Characteristics
- Central control cabinet available in three sizes - for up to 10, 20 or 30 tank
- One pre-installed controller per tank
- Stainless steel casing
- Simple and clear operation
- Informative display with high contrast LED lighting for distance sighting. Simultaneous display of the measured and the set-temperatures, control-mode and the activity
- Temperature indication from -9,9 to +99,9°C, suitable for measuring high temperature processes such as pasteurization, beer mashing, sugar syrup for CSD etc.
- Two integrated collective relays for pump control: one for heating and one for cooling
- Integrated double safety chip for data protection during electric power-out
- With PC data interface for control over Ferm-Software
- Can be locked by code – a single controller or the whole installation at once
- Integration into the bus system VinInfo possible.
Technical Data
Controller:
- Temperature range: from -9,9 to +99,9°C (from 14,2 to 211,8°F)
- Output: 24V AC / 2,5A
- Regulation structure: 2-point (heating or cooling), 3-point (heating and cooling)
- Regulation mode: Cooling / Heating / Cooling & Heating / Display / Off
- Control cabinet:
- Power supply: 230V / 1Ph / 50/60Hz
- Protection type: IP55
Downloads
Applicable industries
- Distilleries
- Cider Production
- Breweries
- Wine Production
Do you have questions about our products?
Our sales team is happy to assist you.
Your satisfaction is our top priority. Rest assured that we provide not only high-quality products but also a service that exceeds your expectations. At WTG-QUANTOR GmbH, you are our focus.
